USB 3.1 to PCI Express x4 (x2 mode) Host Card

U3-PCIE2XG221 is a 2-port USB 3.1 to PCI Express x4 (x2 mode) Gen 2 Host Card.

2-port USB 3.1 to PCI EXpress x4 Host Card
USB 3.1 Host Card
The U3-PCIE2XG221 is an Universal Serial Bus 3.1 host controller, compliant with Intel eXtensible Hot Controller Interface specification revision 1.1, bridging PCI Express interface to two ports of USB3.1, up to 10Gbps high speed bandwidth, backward compatible with legacy USB function and devices. It can configure as PCIe x2 Gen2 or x1 Gen3, compliant with UASP (USB Attach SCSI Protocol) Revision 1.0, supporting the XHCI debug capability.
The design supplies normal core power and suspend core power, supporting the driver on Windows 7, Windows 8.0, Windows 8.1 and various Linux Kernels.

more info: http://www.ioi.com.tw/products/proddetail.aspx?CatID=106&DeviceID=3029&HostID=2070&ProdID=1060193


10Gb/s SFP+ Ethernet to PCI Express x4 Host Card

10 Gigabit Ethernet SFP+ to PCI EXpress x4 Gen2 Host Card
SFP+ 10Gb Ethernet to PCIe x4 Host Card
SFP10G-PCIE4XG201 is 10 Gigabit Ethernet SFP+ to PCI Express x4 Gen 2 Host Card .
The SFP10G-PCIE4XG201 complies with common 10GbE SFP+ optical & Direct Attached Copper modules.
With only 4.12 Watts maximum power consumption (including the optical module in full duplex), the SFP10G-PCIE4XG201 offers the lowest power consumption and the best cost solution in the market today.
Targeted at high-end Workstations and low cost Application Servers, which seek to service the increasing demand of higher network bandwidth, while maintaining low power and cost budgets.


1394b Active Cable & 1394b Long Hual Cable

1394b Long-Haul Active Cable (20/40m) Beta 9 pin plug to Beta 9 pin plug with Jackscrew on both Ends (CB-00539)

1394 long hual cable -- 1394b active cable - beta to beta
1394b active cable

 The 1394b Long-Haul Active Cable (CB-00539) integrated two coax transceivers and is designed to simultaneously transmit and receive signals on a single 75Ω coax cable, extending your signal an additional 20 or 40 meters. It's easy to setup and there is no configuration necessary, like all IEEE1394 compliant hardware.
The 1394b Long-Haul Active Cable (CB-00539) is ideally suited for IEEE 1394b-2002 connections over 75Ω coax cable at S800 data rate as specified in the 1394 TA Baseband Coax PMD Specification. It can also be used at S400, S200 and S100 data rates. The 1394b Active Cable connects seamlessly to any IEEE 1394b-2002 compliant physical layer controller (PHY). For correct operation the signals must be NRZ (non-return-to-zero) encoded, DC balanced with a maximum run length of 10 bits, and have a speed (edge rate) of between 100Mbps and 1.25Gbps.
This 1394b Long-Haul Active Cable (CB-00539) is useful and economical solution for the Machine Vision, Surveillance and FireWire Storage market.

more information: http://www.ioi.com.tw/products/proddetail.aspx?CatID=102&HostID=2009&Cable_HostID=4004&ProdID=1020110